I would be happy to help you find if you will be able to open the rear doors of your 2020 Mercedes-Benz Sprinter 2500 with the 60x19 Curt Cargo Carrier for 2" Hitches # C18100.
You will need to measure from the inside top of edge of your 2" receiver opening to the bottom of the doors on your Sprinter. If this measurement is greater that 2-3/4"" you will be able to open your doors when the carrier is empty without issues. Then it will depend on the height of the cargo that you add.
Additionally,... view full answer...
Yes, the Aries RidgeStep Running Boards - 6-1/2" Wide - Black Powder Coated Steel # AAC3696 will fit your 2020 Mercedes-Benz Sprinter 2500 with a 144" WB. One exception that Aries mentioned is the Sprinter models that have rear air conditioning. If it does have that, then these running boards will not fit.
For when you want the custom installation, the correct VersaTrac mounting kit for your vehicle is # AA2055113. view full answer...
The Titan Alloy Diamond Pattern Snow Chains # TC2524 are a confirmed fit for your 2016 Mercedes-Benz Sprinter, and are chains that I recommend for you. The owner's manual states that you want to use chains on the back tires only.
One of the great features about this tire chain is the ability to install on your tire without having to do any driving just to attach it. It also has a max speed rating of 30 mph; so you will need to take is slow when you have the tire chains on.
I have also... view full answer...
Since you have a Coleman Mach AC system on your RV you'll need the Advent Air Replacement RV Air Conditioner for Coleman Setup w/ Start Capacitor - 15,000 Btu - Black # ACCOL150B or # ACCOL150 (for white).
These units come with and wiring harness adapter that will allow them simply plug right back in how your old Coleman roof top unit did. These both also come with a start capacitor to help jumpstart the AC when a campsite or generator doesn't provide enough power. view full answer...
For an Anti-Sway bar from Roadmaster that is a confirmed fit for your 2017 Mercedes-Benz Sprinter 2500 you will need part # RM-1209-128. Keep in mind that this is an upgrade to a pre-existing OEM anti-sway bar so if none is present you will also need to install part # RM-1209-128. view full answer...
We do have the right trailer hitch receiver that fits your 2016 Mercedes-Benz Sprinter 2500 passenger van with a 144 inch wheelbase and standard bumper, from Draw-Tite.
The correct hitch is the Draw-Tite Trailer Hitch Receiver # 75549.
Then, if you plan on doing some towing with your van and need a wiring harness and brake controller use the Vehicle Wiring Harness w/ Brake Controller Adapter - 7 Way # TK22115 with the Prodigy P3 Brake Controller # 90195. view full answer...
You will be perfectly fine using the Kuat NV 2.0 # NV22G with your 2016 Mercedes-Benz 2500 Sprinter Conversion Van with a C3, 2 inch hitch.
Since the trailer hitch receivers on RVs and trailers are located further away from the rear axle it causes a lot more stress on accessories that are installed in them. That is why only certain bike racks are rated for trailers and RVs. Your Sprinter has a normal distance from the rear axle to where the hitch receiver is located so you can use the... view full answer...
The Curt hitch part # 13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper.
To determine if your spare carrier will fit past the bumper when this hitch is installed you'd need to take one measurement. You'll need to measure from the hitch pin hole out to the nearest upright portion of the carrier. If that distance is greater than 6-1/2 inches it will fit in this hitch and clear the rear bumper. view full answer...
The clearance of of the GearSpace 34 # HGK819 on your 2019 Mercedes Benz Sprinter 2500 depends on how far your ladder rack and spare tire carrier extend from the rear of your vehicle. One way that you can determine for sure if you have enough space is by measuring the furthest outward surface of your tire carrier and ladder from the center of your hitch pin hole. If that measurement falls under 10 inches, you will not have interference when using the # HGK819 on your Sprinter. Unfortunately,... view full answer...
There is just a single difference between the Curt and etrailer trailer hitches that fit your 2023 Mercedes-Benz Sprinter 2500 Cargo Van, which is the finish. The Curt has a glossier finish than the matte black finish of the etrailer hitch, so you can choose which you prefer. The hitches that fit your Sprinter 2500 are the following part numbers:
- etrailer Trailer Hitch Receiver # e76AR
- Curt Trailer Hitch Receiver # C13388
The matte black finish is nice as it hides the inevitable... view full answer...
The VanTred Custom Floor Mat for Cargo Vans # VTMS06M would not fit your 2016 Mercedes Sprinter 2500. Mats that are for a cargo van, such as the VanTred, will not fit in a passenger van such as yours and modifying them is not recommended. There is one option for rear floor mats for your Sprinter, the WeatherTech # WTW25CO. view full answer...
The Rhino Rack RT Style Tracks, part # RRRTS546 are pre-lined to the existing holes in the roof of the 2016 Mercedes-Benz Sprinter 2500.
However, you will need to drill two holes on the rear of each track to install the included rivets.
The complete kit for this is:
Rhino Rack Heavy-Duty Roof Rack Crossbars, 71 inches long, Silver, part # RB1800 or Black, part # RB1800B-2
2x Rhino Rack RLTF Legs for Rhino Rack RTC and RT Style Tracks, part # RLTF
Rhno Rack RT-Style Roof Rack Tracks,... view full answer...
Yes, my contact at BedRug confirmed with me that you can modify the BedRug Custom Floor Mat, # VRMS06M, to fit the seats in your 2016 Mercedes-Benz Sprinter 2500 Van. There will be no need for you to use any other materials when installing the seats back into the van.
As for laying vinyl flooring over the mat, they had no information for that application for the cargo mat. I suggest that after you get the mat installed and sitting in its final position, you see if the mat will be firm... view full answer...
The only running board kit that has been custom-made for your 2019 Mercedes-Benz Sprinter 2500 is the Aries RidgeStep Running Boards w/ Custom Installation Kit # AA86ZB. This doesn't have the fancy electric extend/retract feature but it gives you the step system you're looking for to help your wife out. I like the multiple holes in the boards that help provide extra grip.
You might be able to get the Actiontrac steps to fit but that would be a complete modification and you would want a... view full answer...
The Tow-Rax system is compatible with the Erickson O-Track System and vice versa. The weight capacities/restrictions are based on the attachments themselves, so those individual capacities are what you will want to pay attention to when interchanging the products.
For example the Tow-Rax Low-Profile Floor Track for Tie-Down Anchors - Aluminum - 6' Long - Machined - Qty 1, # TWSP72TA, can use an Erickson Anchor Ring for Erickson O-Track Cargo Control System, # EM59132, but you would be... view full answer...
Yes, the Draw Tite hitch part # 75549 does fit your 2017 Mercedes Sprinter 2500 passenger van without the rear step and the frame width 39-1/2 inches that you mentioned. view full answer...
According to Curt you will not need to remove the spare tire when you install part # C13388 as long as it is a standard spare tire size.
As long as the 2019 Mercedes-Benz Sprinter 2500 is a 170 or 144 inch wheel base, standard bumper and is not a passenger van this hitch is confirmed to fit without removing the spare tire.
If you need wiring, I recommend Tekonsha OEM Replacement Vehicle Wiring Harness w Brake Controller Adapter part # TK22115 because it is the easiest way to install... view full answer...
According to my research, your 2018 Winnebago View is on a 2017 Mercedes-Benz Sprinter chassis. I have floor mats for this van but they are designed to fit the cargo models and have not been tested to work with the cab/chassis models yet. Your best option would be to take a look at the WeatherTech Front Auto Floor Mats part # WT442491 (see link) and see if they match the floors on your cab/chassis. This is the only option I have for you at this time as I mentioned above we do not have a... view full answer...
Your vehicle is able to equip any of the roof kits available for the standard roof, but without the track equipped.
If you'd like the Vortex AeroBar kit, you'll want:
1 Rhino-Rack Vortex Aero Bar 3 Pack, Silver, part # RRVA180S-3 or Black, part # RRVA180B-3
3 Rhino Rack RLTF Legs for OEM/Factory Mounting Points, part # RLTFMS
1 Rhino Rack RLTP Leg Adapters for OEM/Track Mount, part # RRVA-FK1-3
If you'd rather get the Heavy Duty HD Bars, you'll instead get:
1 Rhino-Rack Heavy Duty... view full answer...
Sure, the Yakima BikeSwing # Y02483 can be used on a 2017 Mercedes Sprinter van. It is not a vehicle-specific part, so as long as your '17 Sprinter has a 2" hitch it will work just fine. view full answer...